Opiniones MOTU 828 Mk2 ( 7/10) - 5 opiniones de usuario

En todo el mundo, nuestros 56 usuarios han notado este producto:7/10

5 opiniones de miembros sobre MOTU 828 Mk2 en español

Idioma	Miembro	Características1	Utilización2	Puesta en Marcha3	Opinión Global4
	songboy
	ericthegreat
	FP User Reviews
	FP User Reviews
	FP User Reviews

• 1↑. ¿Cuáles características técnicas han determinado tu decisión? ¿Qué uso haces del producto? ¿Cuál es tu configuración (Placa base/CPU/Ram/Disco duro,...)? ¿Con qué instrumentos o sistemas (mezcladora, preampli,...) usas el producto y con qué tipo de conector? ...
• 2↑. ¿Son estables los pilotos? ¿Son frecuentes las actualizaciones? ¿Cuáles programas usas con más frecuencia? ¿Qué latencia tiene? ¿Cuántas pistas se pueden grabar/leer simultáneamente? ...
• 3↑. ¿Has tenido problemas durante la instalación? ¿Has encontrado problemas de compatibilidad? ¿Es sencilla la configuración general? ¿Es claro y suficiente el manual de usuario? ...
• 4↑. ¿Desde hace cuánto tiempo lo usas? ¿Cuál es la particularidad que más te gusta, que menos te gusta? ¿Habías probado muchos otros modelos antes de adquirirlo? ¿Qué te parece la relación calidad/precio? ¿Con la experiencia, elegirías este producto de nuevo? ...

• 02/12/11

  La opinión de songboy (traducción) Mejorar esta traducción "Not impressed, dull recordings compared to other interfaces."

  See the translation of this user review with Google translate

  Características

  I travel sometimes and help out friends with studio projects. In my travels I sometimes use great gear and sometimes not so great gear. This one is the later in my opinion. I spent two weeks at a friends home studio doing a project with him and he used this interface. He said he bought it at the time because he likes to record at 96khz and this was one of the more affordable units back in '06. We ran this on a PC running protools with an ART Pre Amp and some AKAI condensors and Shure sm57/58s. This was run using the FireWire 400 slot. We recorded single takes using no more than 6 mics at a time (drums).

  Utilización

  The unit itself was very stable. We never had any serious crashes or glitches. Occasionally his PC would get overloaded in mixing but that was because of the heavy use of Plugins and his computer was a little behind. The latency was OK but was only noticed during mixing as we properly setup his gear to handle the latency during recording. We used Pro Tools for the entire session and everything seemed to run smooth with the occasional CPU spike from CPU hungry mixing plugins. We never did more than 6 tracks during our session but he did say he would run more when sequencing/recording his synthesizers and that it handled the load just fine.

  Puesta en Marcha

  There were no compatibility issues that I experienced. Everything booted up properly and his drivers were up to date so it was all good. I never read the manual. He seemed very confident with the unit and said that he was able to start recording in a matter of minutes after it had been installed. The unit is fairly easy to use. The dsp Mixer that comes with unit makes controlling your ins and outs very easy. I have been using Totalmix with my RME Fireface 800 for awhile and I found them to be similar. With the dsp mixer and the front face of the unit itself, most of all the typical functions are found very easily. A few things are down in some menus and such, but nothing is too hard to find.

  Opinión Global

  What I liked most about this unit is that it was stable and was able to record and mix our entire project in 96khz which was a stipulation for my friend. What I didn't like was how, in my opinion, the recorded tracks were pretty dull, especially the drums. We spent a lot of time with EQ, Compression and various other effects trying to bring life back into them. I think we did a decent job, but as soon as I was home, I compared our Raw tracks with some raw tracks I recorded with my FireFace and the difference was very noticeable. The Fireface had much better dynamics and clarity and in my opinion, put the MK2 to shame. I have worked with some MK3's briefly and find they don't suffer nearly as bad ad the MK2 does with this dullness.
  
  I don't know what he paid for the MK2, and maybe it was considered good quality back in the day, but I don't recommend it to anyone who wants a competitive quality of sound. The reality is you get what you pay for. If you want top notch AD/DA, then you need to spend some serious cash.
  ¿Te ha resultado útil esta opinión?síno
• 26/09/11

  La opinión de ericthegreat (traducción) Mejorar esta traducción "one of the best"

  See the translation of this user review with Google translate

  Características

  The sound quality on the mk3 is very good, it's I/o flexibility is nearly perfect, for my needs (live sound) I would love to have 8 mic pres not 2 and dedicated gain control knob for each of the 8 line inputs (or at least one knob that could access each line input gain and shuttle between them. my only real disappointment is the lowest latency setting of 64 samples per buffer this setting is not quite fast enough for a pro musician I normally run at 16 and if I want to run big multichannel shows I might drop to 32 samples per buffer. the 828 mk3 has not proven to be stable until I drop it 96 samples per buffer.

  Utilización

  Motu Hybred 828 mk3 Audio interface will take some getting use to.
  
  Why the special 9 pin to a 6 pin fire wire cable, when it would have been better and more convenient with a standard
  
  6 pin on both sides cable type.
  
  The cable works fine when positioned in a certain way to fit.
  
  Although many computers are discontinuing firewire, for audio fire wire has more bandwidth.
  
  When the 828 Hybred mk3 works it' sounds pretty good.
  
  It replaces my Emu 1818M that I loved and had for many years.
  
  It took some time for Motu to release new drivers for this unit, once downloaded it works fine.
  
  Customer service at Motu was fine, I was able to speak with a tech who helped on the configuration
  
  before the latest driver release drivers for Windows on 8/09/2011 (version 4.0.48697) from Motu Download sight.

  Puesta en Marcha

  Getting started for me was a tough task, but after some reading of the manual (which is easy to understand) i got the hang of it fast.

  Opinión Global

  Overall, Very solid piece for an awesome price. CueMix FX is great and anyone not using it is not using this thing to it's fullest. I can use the CueMix FX to monitor artists using EQ, Comps, & Reverbs with no latency while having my DAW have a 1024 buffer and making it super solid and reliable. It also takes care of talk back and basic volume controls, eliminating the need for any external central station/big knob controllers. Front two inputs are very handy and DO NOT overide analog 1 & 2 on the back. Just really, really feature loaded. On the BAD side...the LED's on the front are useless and the knobs on the front feel really sketchy. The software can control everything and you never really need to touch those though. I have mine hooked up via USB to W7 32bit w/ Samplitude 11.2 and it's been perfect. No crashes, no ASIO dropouts, nothing. GREAT piece at a great price.
  ¿Te ha resultado útil esta opinión?síno
• 01/11/08

  La opinión de FP User Reviews (traducción) Mejorar esta traducción

  See the translation of this user review with Google translate

  Características

  Allows you to record up to 20 channels at the same time at 24bit. The only catch is that 8 of those channels are ADAT (Great if you have a digital mixer) and 2 of them digital coax. That leaves you with 8 1/4" to work with and a pair of combo XLR 1/4" on the front.
  
  
  
  Price paid
  
  
  
  700

  Utilización

  Not bad, I was worried at first not having a lot of reviews from PC users running WinXP. Don't even worry about it, this thing links up with no problems and you can set everything from the Cuemix console on the computer and store it to 20 presets in the unit. Any one of the presets can be loaded from the front panel or the computer very quickly. The six push-turn buttons on the front are confusing as heck, but after a couple of hours of messing with them, you will have the logic down. Lots of routing options, so if you have more gear than inputs, pick up a patchbay at the same time then you can set one Cuemix setup and use your patchbay hardware to do the input switching. The manual is very weak, no help there if you have major questions about using the system without the computer. Its totally written from the computers point of view, assuming that you are running Cubase. If you are running any software that is not ASIO compatable, you can still use it running legacy drivers according to the manual, but its not recommended.

  Puesta en Marcha

  Windows users, you will love this product if you are running Cubase, Vegas, Soundforge, or Acid Pro, All Inputs and outputs are available for use at 96kHz/24bit resolution. I set presets for my diffrent software right into the Cuemix and recall them quickly with the touch of a button on the front panel, as I switch from diffrent Aps. Its even works with my windows laptop with no problems recording 18 channels to the internal hard drive in the field. This is one nice firewire interface that give you a lot of routing options. One word of advice. GET A PATCHBAY so you don't have to reach around back to get to your inputs and outputs, especially if its racked and

  Opinión Global

  Absolutly flawless, no cracks, pops, or coloration to the sound. What you put in is what you get out. Used a compressor and eq chain on inputs 7 and 8 straight from the powered pre-amp outs on the 2 front panels and got a perfectly polished sound from my bass straight into the computer. You can also record the raw sound from the front panel at the same time.
  
  
  
  Wouldn't have my studio with out it! Get one of these! They rock!
  
  
  
  Originally posted on FutureProducers.com
  
  Posted by: Smoothbassman (January 2-, 2005)
  ¿Te ha resultado útil esta opinión?síno
• 01/11/08

  La opinión de FP User Reviews (traducción) Mejorar esta traducción

  See the translation of this user review with Google translate

  Características

  Nothing missing, in fact, it has extra that comes in very handy. I like to purchase equipment based on whether the equipment can be used for production and live. With the 828mkII, you get a free mixer practically! There are 4 mix channels and slots to save mixing presets. So you can have a "Studio" for a headphone mix and another for Monitoring, then just load a "Live" preset for when you go gigging. CueMix has saved me $80.
  
  
  
  Price paid
  
  
  
  $750

  Utilización

  The learning curve is next to nothing. The MOTU 828mkII comes with software for your PC to control anything with a better user interface. Given the limited size of the LCD on the 828mkII, it's a bit hard figuring where things are at first, but using the PC interface, you'll get a good idea and won't find it tough the next time you use the LCD. It comes with ASIO and MME drivers and you can run both concurrently. If you're running your sequencer using the ASIO drivers, you can still run, say, Winamp thru the MME drivers.

  Puesta en Marcha

  Just looking at the construction of the thing tells you it can take a beating... but who'd want to beat a $750 piece of gear with lights in it? You got your wife for that! :P I've only had it for almost a month and I take extra care of any gear, if an accident were to happen, I'm sure as hell confident it'll survive.

  Opinión Global

  The sound quality is prestine. Recording at 96kHz/24-bit has great improved the overall sound of any recording. Recording in 96kHz better captures waveforms more accurately. 24-bit allows for more digital processing without any noticeable degradation/data loss. All plugs are gold-plated, reducing any possibly of radio/noise interference (of course, hi-quality TRS/XLR cables to help A LOT!) If you're a perfectionist, 96kHz won't be enough(386kHz!). But 96kHz is beyond practical, and if your machine can't handle this, there's 88.2kHz... which is twice more samples/sec. than an ordinary CD.
  
  
  
  First of all, it's black, sleek, green and blue lights and an occasional red light when you're clipping... I went from the M-Audio Quattro to this and instantly my recordings sounded better, my production time quicker. If I were given the choice between 10 Digidesign Digi 002 Rack and just one MOTU 828mkII... I'll just take the MOTU (well, take the Digis, sell them all and get more MOTUs!!) It looks good, works excellent, and it's versatile... if I moved to Arkansas, I'd marry this thing!
  
  
  
  Originally posted on FutureProducers.com
  
  Posted by: Borthox ( 2-, 2004)
  ¿Te ha resultado útil esta opinión?síno
• 01/11/08

  La opinión de FP User Reviews (traducción) Mejorar esta traducción

  See the translation of this user review with Google translate

  Características

  Well, the cuemix function doesnt work on 828's, yet the marketed it like it did.
  
  
  
  Price paid: 300 usd

  Utilización

  No problems, worked like it should.

  Puesta en Marcha

  Not the greatest build, but not the worst either.

  Opinión Global

  Flat, not musical. Made all my recordings very dull. I recorded at 48/24. better than your standard soundcard.
  
  
  
  i * hated that thing. It sucked so bad at recording stuff. made everything sound dull. Im only writing this review to warn others of its crappyness.
  
  
  
  Originally posted on FutureProducers.com
  
  Posted by: housewreckinpro ( 1-, 2006)
  ¿Te ha resultado útil esta opinión?síno

45 opiniones de miembros sobre MOTU 828 Mk2 en francés

Idioma	Miembro	Características	Utilización	Puesta en Marcha	Opinión Global	Traducción Google
	Yannthekeys					read
	filbass					read
	solcarlus2					read
	Fazz					read
	OldMcDonald					read
	Djhodjho					read
	Alain Lafuente					read
	BBurn's					read
	guyroots					read
	Mix2dub					read
	MockeryBox					read
	oldmansbird					read
	zik13					read
	ostrovitch					read
	jebb6667					read
	PhilippeSimon					read
	manufaktory					read
	alcools					read
	House of Noise					read
	Skawiwen					read
	Anonyme					read
	jjman					read
	Guy'fx					read
	Gloomyseb					read
	damballah					read
	Pakupaku (lcl)					read
	klems44					read
	Anonyme					read
	Furt					read
	arnaud777					read
	judgewax					read
	sigmunfred					read
	Pik1					read
	Ggalas					read
	chupachups					read
	jcm800					read
	faya vince					read
	le_ver_est_en_toi					read
	(adsr)					read
	Ballot Philippe					read
	Cut-Boost					read
	minimax					read
	matsu					read
	Bertrant					read
	lagsurfer					read

6 opiniones de miembros sobre MOTU 828 Mk2 en inglés

Idioma	Miembro	Características	Utilización	Puesta en Marcha	Opinión Global	Traducción Google
	yoTrakkz					read
	songboy					read
	ericthegreat					read
	FP User Reviews					read
	FP User Reviews					read
	FP User Reviews					read